3rd Party Sensors

Air Velocity and Temperature Sensors

The F300 series is a versatile and rugged, high-performance air velocity and air temperature sensor.

from $993.00 (ex gst)

Air Velocity & Temperature Remote Head Sensors

The F350 series is a versatile, high performance, air velocity and air temperature sensor where the sensor element is built remotely from the sensor electronics.

from $1,134.00 (ex gst)

ACTL Series Split-Core Current Transformers - Accu-CT up to 250A

The Accu-CT revenue grade, split-core current transformer offers outstanding linearity and phase angle accuracy with a unique one-handed opening and closing mechanism.

$104.00 (ex gst)

ACTL-1250 Series Split-Core Current Transformers 250A to 600A

The Accu-CT ACTL-1250 series split-core current transformer (CT) offers revenue grade performance with a unique one-handed opening and closing mechanism

$144.00 (ex gst)

Room Air Quality (VOC) Transmitters QRT 24-series

The room air quality transmitters QRT 24 series for the measurement of VOC's (Volatile Organic Compounds)

$300.00 (ex gst)

ConLab 0-300 Volt AC Transmitter - T-CON-ACT-300

0-300 volt self-powered transformer for monitoring sine wave, single-phase AC voltage. Requires Input Cable for use with U12 loggers.

$351.00 (ex gst)

300 Volt AC Potential Transformer - T-MAG-SPT-300

The Magnelab 300-Volt AC Potential Transformer is used with the FlexSmart TRMS Module to provide accurate measurement of AC voltage.

$236.00 (ex gst)

600 Volt AC Potential Transformer - T-MAG-SPT-600

The Magnelab 600-Volt AC Potential Transformer is used with the FlexSmart TRMS Module to provide accurate measurement of AC voltage.

$241.00 (ex gst)

AC Current Switch - CSV-A8

The CSV-A8 is a split-core AC Current Sensor with adjustable threshold switch output to monitor when equipment turns on and off.

$240.00 (ex gst)

WattNode Advanced Pulse - kilowatt hour kWh energy meter

The Advanced Pulse WattNode is a true RMS AC watt-hour transducer with pulse output proportional to kWh consumed. The WattNode provides accurate measurement at low cost to meet your needs for sub-metering, net-metering, energy management, and performance contracting applications.

$0.00 (ex gst)

Compressed Air Flow Meter - CDI-5200 for 1/2" to 1.5" Pipe - for Data loggers

The CDI 5200 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.

call for pricing

Compressed Air Flow Meter - CDI-5400 for 2" to 8" Pipe - for Data Loggers

The CDI 5400 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.

call for pricing

Air Differential Pressure Transmitters PTO-series

An Air Differential Pressure Transmitter PTO 500V with output 0-10 Vdc and pressure range 0-500 Pa.

$152.00 (ex gst)

VCP Air Differential Pressure Transmitters - PAT

Flexible & Multi Functional Air Differential Pressure Transmitter PAT-series

from $285.00 (ex gst)

VCP CO2 + Temp + RH Transmitter with Display - RCD 010 T

RCD 010 THD is a wall mounted combined Carbon Dioxide (CO2) + Humidity (rH) + Temperature (T) transmitter with display

$414.00 (ex gst)

VCP Duct CO2 sensor CDK

The duct CO2 sensor CDK is a maintenance-free, micro- processor-controlled unit designed for duct installation and is used to detect the CO2 content of the air.

from $464.00 (ex gst)

Duct Air Quality (VOC) Transmitter QDT 24

The Duct air quality transmitters QDT 24 series for the measurement of VOC's (Volatile Organic Compounds)

$399.00 (ex gst)

VCP CO2 + Temperature transmitter CDR 010T

The Carbon Dioxide (CO2) + Temperature transmitter CDR 010T is a self-calibrating microprocessor-controlled unit with 2 x 0-10VDC Outputs.

$327.00 (ex gst)

Carbon Monoxide (CO) Detector COW-series

The VCP Carbon Monoxide (CO) Detectors with a measuring range up to 300ppm are suitable for CO measurement in parking garages, tunnels, engine repair shops, loading bays, engine test benches, shelters, go-kart race courses etc.

from $239.00 (ex gst)

Mini Split-core AC Current Transformers - T-MAG-0400 for Loggers

The small size 5 to 75 AMP split-core AC Current Transformers (CT) are mounted around a current carrying wire to measure AC amperage. This CT provides a 0 to .333 Volt AC output proportional to current flow and are used with Onset loggers.

from $110.00 (ex gst)

Split-Core Bi-Polar DC Transducer - T-VER-971BP-200

Split-Core Bi-Polar DC Transducer sensor that measures up to 200 Amps of DC current in both flow directions.

$695.00 (ex gst)

pHionics STs pH Sensor with 4-20mA output

The pHionics STs Series™ pH sensor provides accurate pH and temperature measurements from 0-14pH to a datalogger or RTU for continuous water quality monitoring.

$1,883.00 (ex gst)

pHionics STs DO (Dissolved Oxygen) Sensor with 4-20mA

The pHionics STs Series™ Dissolved Oxygen sensor accurately measures dissolved oxygen (0-20 mg/L or percent saturation) and temperature (0-50°C) over long periods of time with little maintenance required.

$2,592.00 (ex gst)

pHionics STs ORP (Redox) Sensor with 4-20mA output

The pHionics STs Series™ ORP sensor provides reliable ORP (redox) and temperature measurements to a datalogger, RTU, PLC, or SCADA system for continuous water quality monitoring.

$1,985.00 (ex gst)