Search
Menu Close

HOBO Pendant G Data Logger

Manufacturer:
Onset's HOBO® Pendant G data logger measures 3-dimensional motion (acceleration and angular displacement in 1, 2 or 3 axes), providing data for users to track sports activity or medical therapy compliance and improve performance.
Part Number: UA-004-64
Back to Previous Page
$242.00 ex GST
i h

Track Sports Movement & Shock Vibration Instantly

Measures 3-dimensional motion (acceleration and angular displacement in 1, 2 or 3 axes), providing data for users to track sports activity or medical therapy compliance and improve performance.

The HOBO Pendant G Acceleration Data Logger is a waterproof, three-channel logger with 8-bit resolution and can record up to approximately 21,800 combined x-, y-, and z-axis acceleration readings or internal logger events. The logger uses a coupler and optical base station with USB interface for launching and data readout by a computer.

The logger can be used for a wide variety of experiments, demonstrations and field studies by measuring dynamic acceleration resulting from motion, shock, or vibration. It can also detect static acceleration of gravity, making it possible to measure tilt, activity, and inclination. 

The logger uses an internal three-axis accelerometer with a range of ± 3 g based on micromachined silicon sensors consisting of beams that deflect with acceleration. These beams are arranged to act as a variable capacitor. As the beams move, the capacitance changes proportionately. This capacitance change is converted to voltage, filtered and measured by the logger, and displayed in the software in units of g-force.



Features

  • Low-cost acceleration and tilt measurement
  • Waterproof housing for wet or underwater use
  • Data readout in less than 30 seconds via fast Optic USB interface


Important Information

Requires HOBOware software and either an Optic USB Base Station or a HOBO Waterproof Shuttle (U-DTW-1). HOBOware Pro is required when using the HOBO Waterproof Shuttle. See Related Products below.

Technical Information

Measurement Range ±3 g; 29.4 m/s² (96.5 ft/s²)
Accuracy ±0.075 g; 0.735 m/s² (2.41 ft/s²) at 25°C (77°F)
±0.105 g; 1.03 m/s² (3.38 ft/s²) from -20°C to 70°C (-4°F to 158°F)
Resolution 0.025 g; 0.245 m/s² (0.8 ft/s²)
Logging Interval 1 second to 18 hours, 12minutes, 15 seconds in Normal mode
0.01 seconds (100 Hz) to 0.99 seconds (1.01 Hz) in Fast mode
Time Accuracy ±1 minute per month at 25°C (77°F), see Plot A in User Manual
Operating Range In water/ice: -20° to 50°C (-4° to 122°F)
In air: -20° to 70°C (-4° to 158°F)
Water Depth Rating 30 m from -20° to 20°C (100 ft from -4° to 68°F), see Plot B in User Manual
Battery Life 1 year typical use in Normal mode;
7 days logging at 0.01 seconds (100 Hz) in Fast mode
Memory 64K bytes (approximately 21.8K combined x-, y-, and z-axis readings or
events)
Materials Polypropylene case; stainless steel screws; Buna-N o-ring
Weight 18 g (0.6 oz)
Dimensions 58 x 33 x 23 mm (2.3 x 1.3 x 0.9 inches)
Environmental Rating IP68
CE The CE Marking identifies this product as complying with all relevant
directives in the European Union (EU).

HOBOware Software

HOBOware software is used for launching, reading out, and plotting data from HOBO® data loggers. With HOBOware, you can also check logger status, filter and export data, save changes to graphs in project files, and scale data with the Linear Scaling and Pulse Scaling data assistants. There are two versions of HOBOware: HOBOware and HOBOware Pro.


HOBOware Standard features

  • Simple menus for fast, easy logger setup and readout
  • Point & click for fast setup and readout
  • Scaling to real-world engineering units
  • Presentation-quality graphs
  • Easy export of data files to text or Excel format

FREE DOWNLOAD


Learn more about HOBOware and HOBOware-Pro Features >>


IMPORTANT: This HOBO data logger requires HOBOware software and a communications cable (see related products below)


Track Sports Movement & Shock Vibration Instantly

Measures 3-dimensional motion (acceleration and angular displacement in 1, 2 or 3 axes), providing data for users to track sports activity or medical therapy compliance and improve performance.

The HOBO Pendant G Acceleration Data Logger is a waterproof, three-channel logger with 8-bit resolution and can record up to approximately 21,800 combined x-, y-, and z-axis acceleration readings or internal logger events. The logger uses a coupler and optical base station with USB interface for launching and data readout by a computer.

The logger can be used for a wide variety of experiments, demonstrations and field studies by measuring dynamic acceleration resulting from motion, shock, or vibration. It can also detect static acceleration of gravity, making it possible to measure tilt, activity, and inclination. 

The logger uses an internal three-axis accelerometer with a range of ± 3 g based on micromachined silicon sensors consisting of beams that deflect with acceleration. These beams are arranged to act as a variable capacitor. As the beams move, the capacitance changes proportionately. This capacitance change is converted to voltage, filtered and measured by the logger, and displayed in the software in units of g-force.



Features

  • Low-cost acceleration and tilt measurement
  • Waterproof housing for wet or underwater use
  • Data readout in less than 30 seconds via fast Optic USB interface


Important Information

Requires HOBOware software and either an Optic USB Base Station or a HOBO Waterproof Shuttle (U-DTW-1). HOBOware Pro is required when using the HOBO Waterproof Shuttle. See Related Products below.

Customers who bought this item also bought

HOBO - Optic USB Base Station

A splash-resistant base station and couplers used to offload data from any HOBO data logger with an Optic USB interface.
$368.00 (ex gst)