Personal menu

Land Lancom 4 - Portable Combustion & Stack Emissions Gas Analyser

Manufacturer:

Compact portable multigas analyser, capable of measuring up to eight flue gases in a range of combustion and emissions processes.

Part Number: Lancom 4

Back to Previous Page

Product Files

Call for pricing

Overview
Specifications
Software
Applications
User Guides
Land Applications

Lancom 4 delivers the complete solution for portable flue gas analysis, integrated into a compact battery-powered unit able to measure up to eight gases simultaneously with nine separate sensors.

Simple to set-up and easy to operate, Lancom 4 enables highly accurate spot and semi-continuous gas testing adaptable to a wide variety of applications – ensuring your plant maintains full compliance with safety and emissions requirements.

Customisable to specific gas measurements and process stream conditions, a resilient stainless steel probe extracts the gas sample while advanced real-time processing techniques produce the highly accurate combustion and emissions calculations you need.

Easy to service and maintain, Lancom 4 is the ideal choice for industries burning coal, natural gas, oil or biomass, including applications in Glass, Power Generation, Hydrocarbon Processing, Natural Gas Compressor Stations , Minerals and Industrial Boilers.

MULTIGAS ANALYSIS MADE SIMPLE
Power up Lancom 4 and be ready to measure in minutes. Supported by automatic zero calibration and continuous system diagnostics, excellent analytical performance is maintained throughout a long-life eight-hour battery charge.

ALL THE MEASUREMENTS THAT MATTER
All major flue gases are monitored, including oxygen, carbon monoxide (low, H2 compensated, high), sulphur dioxide, nitrogen oxides (both NO and NO2), carbon dioxide, hydrogen sulphide, and hydrocarbons. The standard probe is suitable for most applications and is available in lengths from 0.3 m (1 ft) to 3 m (10 ft). High-temperature and DrySampler probes are available for the most challenging conditions. Optional probes allow Lancom 4 to measure smoke spot number and flow velocity.

MAKE PROCESS DECISIONS FASTER
Data is displayed on the intuitive multi-language interface. An internal data logger stores your measurements for analysis, and data can be imported directly into any spreadsheet. or viewed using the free Insight data acquisition software system so you can make process decisions with more confidence, more quickly.

Lancom 4 is AMETEK Land’s complete analysis solution for portable flue gas analysis.

APPLICATION NOTE
PORTABLE FLUE GAS APPLICATIONS
Measuring flue gases produced when fuel or other materials are burned in industrial plants or power stations is important for process control, efficiency and emissions monitoring. As the most accurate, robust and flexible portable flue gas analyser available today, Lancom 4 provides an ideal solution for industries burning coal, natural gas, oil or biomass, including power generation, steel, glass and cement manufacturing. Read More > Watch the video >

Display:	Full function color LCD with backlight, wide QVGA display
Keypad:	Tactile membrane (integral with display) function keys and cursors
Indicators:	LED for ON (Power), Stand-by, Charge, Low Battery, Fault
Power Supply:	95-265 V AC, 50-60 Hz, 30 Watts. Battery, rechargeable lead-acid (internal). Typical 8 hour operation, dependent on options fitted
Ambient Temperature:	-5 °C to 45 °C (+23 °F to 113 °F)
Case:	Medium density blended polyethylene
Dimensions:	453 x 120 x 245 mm (17.8’’ x 4.7’’ x 9.6 inches)
Weight:	6 kg (13 lb)
Standard Accessories:	Integral Water Catchpot and Filters
	Battery Charger Supply
	Data Logging
	Insight Data Acquisition Software (free download)
	Wake and Sleep facility (Semi-continuous monitoring)
	Carry Case
Options:	Min of 3 to max 9 gases in total, from a selection of 9 gases
	Probe length options - 0.3, 1.0, 1.5, 2.0, 3.0 m/1, 3.3, 5, 6.5, 10 ft
	Hose length options - 3 m/10 ft or 10 m/33 ft
	Draft Measurement
	Flow Measurement
	Smoke Measurement
	Analogue outputs (eight 4-20 m A outputs)
	Languages - English, French, German, Italian, Spanish & Chinese; others available
	External Printer

MARCOM0357

Probe Specifications

Probe	Measurement Capacity	Length	Max Temperature	Options / Accessories
1. Dry SamplerTM	All Gases Plus Higher Performance with Soluble Gases NO2 & SO2	0.3, 1.0, 1.5, 2.0, 3.0 m 0.9, 3.3, 5.0, 6.6, 9.8 ft	600 °C 1112 °F	3 m or 10 m / 10 ft or 33 ft Hose Available
2. Standard	All Gases	0.3, 1.0, 1.5, 2.0, 3.0 m 0.9, 3.3, 5.0, 6.6, 9.8 ft	600 °C 1112 °F	3 m or 10 m / 10 ft or 33 ft Hose Available
3. Smoke	All Gases Plus Smoke Density	0.3, 0.75, 1.0 m 0.9, 2.4, 3.3 ft	600 °C 1112 °F	3 m / 10 ft Hose Available
4. Flow	All Gases Plus Flow, velocity, Mass Emissions	0.7, 1.0, 2.2, 3.0 m 2.3, 3.9, 7.2, 9.8 ft	600 °C 1112 °F	3 m / 10 ft Hose, Filter Papers, Smoke Spot Chart, In-line Flowmeter
5. High Temp	All Gases	0.5, 1.0, 1.5, 2.0 m 1.6, 3.5, 5.0, 6.6 ft	1400 °C 3663 °F	3 m / 10 m / 10 ft or 33 ft Hose Available

Measurement Specifications

Sensor	Detection Limit	Full Scale Range	Upscale Repeatability	Resolution
O2	0.2 %	0 to 30 % v/v	±1 %	0.1 % v/v
CO (low)	2 ppm	0 to 6000 ppm	±2 %*	0.1 ppm
CO (H2 compensated)	2 ppm	0 to 4000 ppm	±2 %*	0.1 ppm
CO (high)	20 ppm	0 to 10 %	±2 %*	0.1 ppm
SO2	2 ppm	0 to 4000 ppm	±2 %*	0.1 ppm
NO	2 ppm	0 to 5000 ppm	±2 %*	0.1 ppm
NO2	2 ppm	0 to 1000 ppm	±2 %*	0.1 ppm
H2S	4 ppm	0 to 1000 ppm	±2 %*	0.1 ppm
CO2 **	0.2 %	0 to 20 % v/v	±2 %*	0.1 % v/v
Hydrocarbons (CxHy)	(Application dependent)	0 to 5 % v/v	±4 %*	0.1 % v/v
Flue Gas/Ambient Temperature	Measured
Draft	± 50 hPa / 20 “ Water Gauge ***
Flow (velocity)	1 to 50 m/s

*Calibration per ASTM D-6522 or LAND factory procedure.
**True measurement if sensor fitted (calculated if not).
***Reduced to ± 25 hPa / 10’’ Water Gauge when used with flow probe.
#Operating at maximum possible range may affect sensor life and accuracy.

For further technical specification information please refer to the specific product brochure within the Documentation section above.

PC data acquisition software for direct logging of stack emissions measurements from Lancom 4 portable gas analysers.

See Land's web site here: https://www.ametek-land.com/products/software/insightdataacquisitionanalysis

Land Applications & Industries

Cement

LAND have supplied the Cement Industry and OEM's throughout the world with temperature measuring equipment for over 60 years. All their products are designed to the highest standards of quality and reliability to ensure accurate measurements under plant operating conditions for; kiln shell, rotary kiln product & burning zone and clinker system read more >>

Iron and Steel Making

Designed to operate in the harsh environments found in steel production, these instruments are designed to the highest performance standards, optimised for making temperature measurements at every important stage of the process including; Soaking Pit (Load Temperature), Coke Oven Flue, profile, burden & conveyor, Hot blast stove, main & furnace burden, liquid iron stream, torpedo car, ladle pre heat, ladle and tapping learn more >>

Aluminium Extrusion

LAND offers a complete new integrated range of thermometer systems dedicated solely to aluminum temperature measurement. These instruments contain unique-to-Land design features which provide inherent measurement stability and reliability. In the aluminum extrusion industry, product quality and operating profitability rely on efficient press operation. Press efficiency is increased greatly with accurate, reliable temperature measurement at critical points in the process including; preheated die, billet profile , die exit & quench exit temperatures read more >>

Aluminium Rolling

The Land Aluminium Strip Thermometer system is specifically designed to provide the aluminium hot rolling industry with a solution to one of its most difficult problems - accurate and reproducible temperature measurement of bright, semi-finished hot alloy strips learn more >>

More Industry Applications

Land has supported the global industrial community for more than 70 years, supplying innovative, reliable products and solutions. They have a worldwide reputation as innovators and manufacturers of high-quality, precision thermometers and thermal imagers.

Land's monitors and analysers provide industries with infrared, non-contact temperature measurement, combustion efficiency monitors and environmental pollution emissions detectors. Their products are used extensively in applications as diverse as steel, glass, electronics, mineral processing, power generation, utility and aircraft gas turbines, and a wide range of other industries. Ongoing development creates products for new applications and the continuous improvement of an expanding product range.

Steel: The infrared thermometers offer process solutions across more than 50 individual applications, ensuring process efficiency and continue reading >>
Aluminium: Including a wide range of stable, rapid response and reliable application-specific instruments designed to the highest standards continue reading >>
Speciality Metals: Products that you need for precise temperature measurements during speciality metal production, including solutions for copper and platinum refining continue reading >>
Calibration: The blackbody calibration sources provide a high-precision calibration of radiation thermometers, on-site and under laboratory conditions continue reading >>
Glass: Land has developed a range of instruments specifically designed to meet the challenges of glass production continue reading >>
Hydrocarbon Processing (HPI): Built to the highest standards of quality and reliability, their HPI measurement solutions are designed to operate in industrial conditions, delivering the accuracy you need to control your process continue reading >>
Industrial Processing: Used extensively in a range of industrial processes including paper, plastics, ceramics and non-wovens, Land's accurate online and portable thermometers, linescanners and thermal imagers support your applications continue reading >>
Minerals: Land supplies high-precision, reliable non-contact temperature measurement instruments specifically designed for mineral industry applications, including cement and roadstone production continue reading >>
Power Generation: With a range of detection options for every stage of the combustion process, Land's products guard against spontaneous fires. They also provide solutions for continuous emissions monitoring and plant condition monitoring continue reading >>