-
OVERVIEW
Non-Contact Infrared Temperature Sensor with Analogue Outputs
The PyroCouple is a simple infrared temperature sensor with a choice of analogue outputs. No complicated setup is required – just connect a temperature indicator and power supply, and instantly start taking measurements. It is suitable for non-contact temperature measurement on most non-reflective non-metal surfaces, such as paper, thick plastics, asphalt, painted surfaces, food, rubber and organic materials, among many others.
PyroCouple non-contact infrared sensors measure temperatures from -20°C to 500°C and provide either a linear 4 to 20 mA output, a voltage output or a thermocouple output. This range of output signals is compatible with almost any indicator, controller, recorder, data logger etc., without the need for special interfacing or signal conditioning. They are suitable for most materials such as food, paper, textiles, plastics, leather, tobacco, pharmaceuticals, chemicals, rubber, coal and asphalt; but not materials with a low emissivity, for example polished metals. Two-wire and four-wire versions are available:
Two-wire PyroCouple sensors transmit the target temperature as a 4-20 mA output and offer a simple solution for most applications.
Four-wire PyroCouple sensors transmit the target temperature as a 0-50 mV or thermocouple output (type J or K) plus the internal sensor temperature as a 4-20 mA output. This second output can be used to ensure that the sensor is being operated within the correct ambient temperature limits and prevent damage caused by overheating or overcooling. It can also be used to give an approximate indication of the air temperature surrounding the sensor.
Features:
- Temperature ranges from -20°C to 500°C
- Two-wire 4-20 mA output or four-wire voltage/ thermocouple output
- Choice of precision optics for large or small targets
- Fast response with high stability
- Stainless steel housing, sealed to IP65
- Quick and easy installation
- Wide range of accessories
- Fixed emissivity 0.95 for measuring non-reflective non-metals, and painted surfaces (including painted or coated metals)
- Conforms to industrial EMC standards
- Ideal for measuring non-reflective non-metals, or painted metal surfaces
- Not designed or approved for fever detection
Please refer to product images or datasheet for field of view images.
-
APPLICATIONS
Infrared Temperature Measurement in Paint Curing
In the painting of products such as automobile body panels, long term durability and consumer appeal depend on the quality of the coating application processes. This quality, determined by adhesion, hardness, corrosion reistance, finish and colour, depends largely upon curing temperature cycles. Calex’s non-contact infrared temperature sensors are capable of giving the user or OEM tight control over this cycle, where none existed before.
To learn more, see the link in our linked resources below.
Asphalt Temperature Measurement in Road Laying
The PyroCouple Series of infrared temperature sensors is ideal for measuring temperature of the road surface before and after tarmac is laid.
To learn more, see the link in our linked resources below.
Measuring Gas Cylinder Temperature During Filling
Infrared temperature sensors from Calex Electronics have been used with success for over 7 years be a leading provider of packaged gas for measuring the temperature of gas cylinders as they are filled.
To learn more, see the link in our linked resources below.
From stargazing to drinks dispense; Infrared thermometers in compressed gases
Dr. Peter Watters explains several case studies in monitoring gas cylinder temperatures with infrared thermometers and looks at potential future applications
To learn more, see the link in our linked resources below.
-
SPECIFICATIONS
Temperature Range -20°C to 100°C (LT models)
0°C to 250°C (MT models)
0°C to 500°C (HT models)Optics Choice of optics for small or large targets at short or long distances – see Field of View Diagrams Output (Measured Temperature) Two-wire 4-20 mA (-0 models)
0-50 mV (-1 models)
Type J Thermocouple (-3 models)
Type K Thermocouple (-4 models)Output (Sensor Body Temperature) 4-20 mA on power loop (models with output options 1 to 4 only) Accuracy ±1% of reading or ±1ºC, whichever is greater Repeatability ± 0.5% of reading or ± 0.5ºC, whichever is greater Emissivity Fixed at 0.95 Response Time, t90 240 ms (90% response) Spectral Range 8 to 14 μm Supply Voltage 24 V DC (28 V DC max.) Min. Sensor Voltage 6 V DC Max. Loop Impedance 900 Ω ( 4-20 mA output) Output Impedance 56 Ω (voltage/thermocouple output) Mechanical Specifications
Construction Stainless Steel Dimensions 18 mm diameter x 103 mm long Thread Mounting M16 x 1 mm pitch Cable Length 1m (longer lengths available to order) Weight with Cable 95 g Environmental
Environmental (IP) Rating IP65 Ambient (Operating) Temperature Range 0°C to 70°C Ambient (Operating) Humidity 95% max. non-condensing Electromagnetic Compatibility Standards
EN61326-1, EN61326-2-3 (Electrical Equipment for Measurement, Control and Laboratory Use – EMC Requirements – Industrial)
Calex PyroCouple Series Infrared Thermometer
From: $374.00 NZD ex GST
The PyroCouple is a simple infrared temperature sensor suitable for non-contact temperature measurement on various surfaces between -20°C to 500°C. This general Purpose Infrared Temperature Sensor offers an Analogue Output
