The dew point meter DP 500 with data logger is the ideal portable service instrument for dew point measurement for all types of dryers down to -80°Ctd dew point. The 3.5“ graphic display with touch screen makes the operation very easy. The graphic indication of coloured measuring curves is unique. Ideal for measurement of the current dew point and for graphic indication of the dew point curve/ the switching behavior of the dryer over a longer period of time.

Up to 100 million measured values can be stored with date and measuring site name. The measured data can be transferred to the computer via USB stick. The data can be evaluated comfortably by means of the software CS Soft Basic. Measured data and service reports can be issued easily and quickly.

Applications:

• Compressed air: Examination of refrigeration, membrane, adsorption dryers
• Technical gases: Residual moisture measurement in gases such as N2, O2 etc.
• Plastics industry: Examination of granulate dryers

Special features:

• Precise dew point measurement down to -80°Ctd.
• Quick response time
• 3.5″ graphic display / easy operation via touch screen
• Integrated data logger for storage of the measured values
• USB interface for reading out via USB stick
• Calculates all necessary moisture parameters like g/m³, mg/m³, ppm V/V, g/kg, °Ctdatm
• International: Up to 8 languages selectable

Set DP 500 in a case – consisting of:

• Portable dew point meter DP 500 for compressed air and gases
• Mobile measuring chamber up to 16 bar
• Diffusion-tight PTFE hose with quick connector, length 1 m
• Power supply for DP 500/510
• Control and calibration set 11.3 % RH
• Quick-lock coupling
• Dry container for CS dew point sensors
• Transportation case (small) for DP 500

 

Display:	3.5″ touch screen
Measuring range:	-80…+50 °Ctd -20…+70 °C 0…100% RH
Accuracy:	± 0.5 °Ctd at -10…+50 °Ctd Typ. ± 2 °Ctd (further range)
Moisture parameters:	g/m³, mg/m³, ppm V/V, g/kg, °Ctdatm, % RH
Pressure range:	-1…50 bar standard -1…350 bar special version
Interface:	USB interface
Data logger:	16 GB SD memory card (100 million values)
Power supply:	Output voltage: 24 VDC ±10% Output current: 120 mA in continuous operation
Power supply:	Internal rechargeable Li-Ion batteries, approx. 12 h continuous operation, 4 h charging time
Screw-in thread:	G 1/2″ stainless steel
Ambient temperature:	0…+50 °C
EMC:	DIN EN 61326-1