-
OVERVIEW
Quick and easy set-up with Self-describing technology
For use with HOBO MX1104 and MX1105 multi-channel data loggers, this temperature sensor, which is suitable for pipe mounting, offers integrated strain relief, so the probe is secured to the logger. And it features Self-Describing technology to automatically communicate configuration information to the logger, without any programming or extensive user setup.
Highlighted Features
- Self-Describing technology for quick, easy set up
- Locking jack to ensure sensor is connected and stays connected
- Measurement range of -40° and 100°C (-40° to 212°F)
- Accuracy of ±0.15°C from 0° to 70°C (±0.27°F from 32° to 158°F)
- Available in 1.8 m (6 ft)
- Faster response time
- Suitable for pipe mounting
-
SPECIFICATIONS
Measurement Range -40° to 100°C (-40° to 212°F) Accuracy ±0.15°C from 0° to 50°C (±0.27°F from 32° to 122°F), insert probe 2.3 cm (0.9 inches) minimum; see Plot A in User Manual Resolution 0.002° at 25°C (0.003° at 77°F) Drift <0.1°C (<0.2°F) per year Response Time in Air 2 minutes typical to 90% in air moving 1 m/s (2.2 mph) Response Time on a Pipe Typically 2 times faster than the SD-TEMP-xx air/water/soil temperature probe; typically less than 1 minute to 90% Probe Housing Copper-plated sensor tip Probe Dimensions 0.9 x 5.8 cm (0.38 x 2.3 inches) Cable Length 1.8 m (6 ft)
HOBO Self-Describing Pipe Temperature Sensor (6ft)
$210.10 NZD ex GST
New Zealand dollar ($) - NZD
For use with HOBO MX1104 and MX1105 multi-channel data loggers, this temperature sensor is suitable for pipe mounting, and features Self-Describing technology to automatically communicate configuration information to the logger, without any programming or extensive user setup.
