-
OVERVIEW
The NIR Borescope can give the operator access to data which would have previously been either highly time consuming to collect or perhaps completely unknown. Through collecting this data the operator can begin to increase the efficiency of the furnace/melt tank, improving product quality and reducing process costs.
Using LIPS (Land Image Processing System) the operator has the ability to set points or areas of interest and measure live data points as well as storing and trending this data for future analysis. By monitoring the live video, it can allow the operator to configure the correct, most efficient firing pattern and achieve optimum performance from the burners. This can save significant costs through reducing fuel usage and gaining the best possible performance from the furnace/melt tank
The NIR-b offers the operator numerous advantages over the existing techniques:
- The operator gets a high resolution radiometric image of the process meaning a live temperature value can be obtained from any point on the image.
- Automated alarm outputs can instantly alert the user to any problems within the process
- Any air leaks and glass leaks, which are detrimental to the efficiency of the furnace are clearly visible and simple to detect
- A clear profile of the flame is easily visible
- The operator has access to more than 324,000 live temperature data points
- Thermocouple can alert to product overheating
- Coverage 24 hours a day, 7 days a week
- Improve plant safety by removing personnel from the dangerous environment of the application
- Monitor all positions from the safety of the control room
- Long term data trending
- Fuel optimisation meaning significant savings on gas
Key Benefits
- Accurate, high resolution radiometric thermal imaging camera provides high definition temperature maps enabling precise product control and monitoring
- Short wavelength sensor provides low sensitivity to emissivity changes and can be used through existing glass or quartz view ports.
- Resolution of 656 x 494 pixels gives 324,000 live temperature data points.
- Dedicated software with data points, areas of interest, automated alarms and long term data trending
- 24 hour, 7 day monitoring solution means accurate trending information with no missing data
- Live data points mean measurements are taken from exactly the same point each time. This removes operator error from collected information
- Shutter less operation ensures 100%measurement availability (i.e. no blind times)
- The thermocouple located at the tip of the NIR-b can alert the operator if the instrument temperature is rising to unsafe levels, it can be removed from the process and avoid damage
- 24 Month Warranty gives ownership piece of mind
What advantages does the Borescope have?
Building on more than twenty years experience with infrared technology Land has continued to widen its range of temperature measurements solutions by launching the NIR Borescope. With the NIR Borescope it is possible to use the
proven technology of NIR Thermal Imager to accurately profile the temperature of the entire furnace with only a small opening in the wall.Thermal imaging inside refractory lined furnaces, boilers and glass melt tanks normally requires the plant operator to cut large openings in the refractory to enable viewing of the critical area. This can cause significant wasted energy from heat
loss and can be difficult to keep the opening free from debris. The NIR-b has a 90° viewing angle, through a narrow opening to overcome this.Why traditional methods of monitoring are highly limited?
The NIR-Borescope offers significant advantages over some of the traditional methods of furnace monitoring, including Visual Inspection (can take hours to comple and isn’t continuous), a Visual Camera (does not provide a termperature reading) or using Thermocouples (regular failure or loss of connections).
-
SPECIFICATIONS
Temperature
Low Temperature (C): 600 High Temperature (C): 1800 Low Temperature (F): 1112 High Temperature (F): 3272 Measurement Range
Measurement Parameters
Available Ranges (With respect to Blackbody)
600 – 1000 ºC/1112 – 1832 ºF
800 – 1400 ºC/1472 – 2552 ºF
1000 – 1800 ºC/1832 – 3632 ºF
Probe Lengths 305mm / 12”, 610mm / 24”, 915mm / 36”
Probe Diameter (of Water Cooled Tube) 54mm / 2.2”
Accuracy ±1%K of target temperature
Repeatability <1°C
Detector Silicon focal plane array
Image Size (Detector Array Format) 656 x 494 pixels
Frame Rate 30fps (Gigabit Ethernet)
Outputs Digital data over Gigabit Ethernet (M12)
Optical System 44°
90°
Field of View 44° x 33°
90° x 67.5°
IFOV 1.2mrad
2.4mrad
Focusing Range 1000mm (3’) to infinity
Spectral Response 780 to 1100nm
Emissivity Adjustment 0.2 to 1.0 in 0.01 steps
Operating Temperature Range 0 to 60ºC / 32 to 140 ºF (Operating)
Storage Temperature Range -20 to 80 °C / -4 to 176 °F (non-condensing)
Operating Humidity 0 to 90 % non-condensing
Power Requirement 24VDC (3 watts)
Weight: 15kg (for 2’ variant)
Sealing IP65 / NEMA 4
Vibration 3g between 10 and 300 Hz
Mountings Choice of 3in ANSI Flange & Gasket & PN16 DN80 Flange & Gasket with a 12” standpipe
Probe Diameter 54.0mm / 2.125in.
Software Complete LIPS (Land Image Processing Software) package for PC
Standard Accessories Power supply, Cables, Software, Water cooled/purged Mounting and Tube
-
SOFTWARE
IMAGEPro
The innovative IMAGEPro software is an advanced image processing software for controlling, monitoring, analysing and capturing imager data.
Download Software >>
IMAGEPro is a Windows PC software system that enables configuration of imager, display properties and advanced temperature analysis options and supports multiple simultaneous imagers. Free 30-day trial available for extensive testing.
Able to monitor and control up to sixteen imagers, IMAGEPro offers real-time analysis for thermal imager ranges. Giving users exceptionally detailed control over their thermal imaging measurements, IMAGEPro enhances application processing.
Land NIR Borescope – Temperature Profiles inside Furnaces
$0.00 NZD ex GST
Thermal Imaging Solutions for Furnaces, Glass Melt Tanks and Kilns
