-
OVERVIEW
Wireless sensor sends alerts to iMonnit
Upon pressing the sensor’s button, a notification is sent to iMonnit software. An on-sensor LED confirms software response, and an alert is issued via text, email, or call. Front-desk and custodial personnel can be instantly notified if a restroom needs maintenance; engineers and facility managers use the sensor to evaluate installation sites and validate sensor performance.
Monnit Enterprise Button Press Wireless Sensor sends a signal to the iMonnit Online Sensor Monitoring and Notification System when the button is pressed triggering a notification via SMS text or email and tracking the data in the online system and can be reviewed and exported as a data sheet or graph. Notifications can be set up through the online system to alert the user immediately when movement is detected with the ability to only notify within time of day parameters.
This sensor come standard with two replaceable AA batteries. The typical battery life is approximately 10 years.
Features
- Impressive wireless range of up to 1,200 feet through walls
- Frequency-hopping spread spectrum (FHSS)
- Improved interference immunity
- Improved power management for longer battery life
- Encrypt-RF® Security (Diffie-Hellman Key Exchange + AES-128 CBC for sensor data messages)
- Over-the-air updates
- Free iMonnit basic online wireless sensor monitoring and notification system to configure sensors, view data and set alerts via SMS text and email
- Stores 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through the power cycle)
- 10-minute heartbeats = ~ 22 days
- 2-hour heartbeats = ~ 266 days
Applications
- Customer service request button
- Hotel/Motel front desk call button
- Service Call button
- Access Call button
- Service verification
-
GATEWAY
Gateway Options for Seamless IoT Data Communication
Monnit offers a range of gateway options designed to facilitate wireless sensor data communication within IoT networks. These gateways, serve as crucial conduits for transmitting sensor data to the iMonnit software platform and play a pivotal role in ensuring seamless and efficient data transmission for IoT applications.
Click here to explore the diverse range of gateway devices available >>
-
SOFTWARE
Manage Your Monnit Sensors with iMonnit Cloud-based Software
Monnit’s Sensor Monitoring Software, iMonnit, stands as a cutting-edge cloud-based platform and central hub tailored for the seamless management of Monnit sensors. With a focus on data security, all information is safeguarded on dedicated servers running Microsoft SQL Server. This intuitive online user interface serves as a command centre for arranging, monitoring, and modifying device settings to suit individual requirements.
OneTemp provides complimentary activation and setup services for new iMonnit accounts, while a free mobile app empowers users to maintain control at all times. Whether opting for the basic version or upgrading to iMonnit Premiere, users can unlock the full spectrum of features that enrich the Monnit experience.
Click here to explore the software options >>
-
SPECIFICATIONS
Supply Voltage 2.0-3.8 VDC (3.0-3.8 VDC using power supply) * Current Consumption 0.2 μA (sleep mode), 0.7 μA (RTC sleep), 570 μA (MCU idle),
2.5 mA (MCU active), 5.5 mA (radio RX mode), 22.6 mA (radio
TX mode)Operating temperature range (board circuitry and batteries) -18°C to 55°C (0°F to 130°F) using alkaline
-40°C to 85°C (-40°F to 185°F) using lithiumOptimal battery temperature range (AA) +10°C to +50°C (+50°F to +122°F) Button type Momentary Number of operations 10,000,000 Integrated memory Up to 512 sensor messages Wireless range 1,200+ ft non-line-of-sight Security Encrypt-RF® (256-bit key exchange and AES-128 CTR) Weight 3.7 ounces Certifications 900 MHz product; FCC ID: ZTL-G2SC1 and IC: 9794A-G2SC1.
868 and 433 MHz product tested and found to comply with: EN
300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02)
and EN 60950*Hardware cannot withstand negative voltage. Please take care when connecting a power device
Monnit Enterprise Button Press Wireless Sensor
$368.50 NZD ex GST
Upon pressing the sensor’s button, a notification is sent to iMonnit software. An on-sensor LED confirms software response, and an alert is issued via text, email, or call.
NOTE: Gateway Required for Operation – Refer to Tab Below
