The LCT-485 is an RS-485 network interface module for the ExTemp infrared temperature sensor.
This unit, when connected on the safe side of an Intrinsically Safe isolator or barrier, allows the measured temperature to be read from the ExTemp sensor via the open Modbus RTU protocol. The sensor’s configuration parameters may also be examined and changed. Each LCT-485 unit allows communication with one ExTemp sensor. The chosen isolator or barrier must be compatible with the transmission of digital data superimposed over an analogue 4-20 mA signal. This allows the LCT-485 to communicate digitally with the ExTemp. The LCT-485 is a Slave device; up to 224 devices may be connected to a third-party Modbus Master.
Dive into the intricacies of Calex’s LCT-485 RS-485 Network Interface with these comprehensive Installation and Operating Instructions. This guide provides step-by-step instructions for installation, as well as detailed guidance on operating the product to its fullest potential.
To start your journey with this exceptional product, simply click the link to the right to access the instructions.
