Search
Menu Close

HOBO RX3000 - Outdoor Remote Monitoring Station

Manufacturer:
The HOBO RX3000 is Onset’s next-generation remote data logging station that provides instant access to site-specific environmental data anywhere, anytime via the internet.
Part Number: RX3000
*
*
Back to Previous Page
$0.00 ex GST
i h

Get Smarter About Your Environment With The RX3000

The HOBO RX3000, Onset’s most flexible remote data logging station, provides instant access to site-specific environmental data anywhere, anytime via the internet. The station combines the versatility and sensor quality of more expensive systems, an onboard LCD display, and the convenience of plug-and-play operation. The RX3000 is a configurable system.

The RX3000 station is the basic component of the cost-effective and scalable HOBOnet Field Monitoring System for crop management, environmental research, and greenhouse operations.

You can customise your RX3000 to suit your specific needs, or you can select one of our Weather Station Kits.


Highlighted Features

  • Flexible support for a broad range of sensors
  • LCD display for easy field deployment
  • Cloud-based data access through HOBOlink
    • Get 24/7 web access to your data via web browser
    • Verify RX3000 system status remotely
    • Set up and manage alarm notifications over the web
    • Schedule automated delivery of data
  • Plug-and-play operation
  • Alarm notifications via text, email
  • Rugged double-weatherproof enclosure
  • Configurable from your mobile device
  • Optional Analog Input, Relay, and Water Level Sensor Modules
  • Remote water level and water flow monitoring with Onset’s Water Level Module.


Applications


Measurements

The RX3000 Data Logger supports the following measurements (sensors sold separately):

Temperature, Relative Humidity, 4-20mA, AC Current, AC Voltage, Air Velocity, Amp Hour (Ah), Amps (A), Barometric Pressure, Carbon Dioxide, Compressed Air Flow, DC Current, DC Voltage, Differential Pressure, Event, Gauge Pressure, Kilowatt Hours (kWh), Kilowatts (kW), Leaf Wetness, Light Intensity, Power Factor (PF), Pulse Input, Rainfall, Soil Moisture, Volatile Organic Compound, Volt-Amp Reactive (VAR), Volt-Amp Reactive Hour, Volt-Amps (VA), Volts (V), Water Flow, Water Level, Watt Hours (Wh), Watts (W), Wind


Important Note:

HOBOware software and USB cable are required for initial setup of WiFi units or Ethernet units with Static IP addresses.

HOBOlink is a web-enabled software platform designed for HOBO RX3000/MicroRX Remote Monitoring Systems and HOBOnet Field Monitoring Systems.

HOBOlink service plans are 12month subscriptions that provide remote access via any web browser, offering 24/7 access to your data and the ability to verify your system status, set up and manage alarm notifications, and schedule automated delivery of data, plus a whole lot more. 

 

HOBOlink Key Features

  • Access your data with a web browser or mobile device
  • Verify system status remotely
  • Set up and manage alarm notifications remotely
  • Schedule automated delivery of data
  • Configure a dashboard that highlights your most important measurements
  • Create dashboards that bring data from multiple systems together in a single view
  • Configure calculated channels such as dew point, accumulated rainfall, and evapotranspiration (ET)
  • Export the exact date range and sensors you want
  • Supports HOBO U30 Remote Monitoring Systems as well

 

Click here to learn more about HOBOlink or to watch our helpful tutorials of the system!

 


   


   

24/7 Data Access with HOBOlink


The HOBO RX3000 Station transmits data to HOBOlink – Onset’s cloud-based software platform. HOBOlink makes it easy to access current and historical weather data, manage and control your RX3000 stations remotely, and set alarm notifications. You can also schedule automatic delivery of data files.


Live Data

Weather: Onset is using a HOBO RX3000 Remote Monitoring System to monitor weather outside of Onset Corporate Headquarters. View Now >>


Learn more about HOBOlink

HOBO RX3000 Remote Monitoring Station

This video is an introductory high-level overview of the HOBO RX3000 Remote Monitoring Station.


HOBO RX3000 Cable Channel Kit Assembly Installation

This video shows you how to install the cable channel kit assembly for the HOBO RX3000 Weather Monitoring Station


RX3000 Analog Module

The optional analog module has four analog inputs that support excitation power, scaling, and statistics measurements. 


How to Register and Setup your RX3000

This will provide an overview of how to register and setup your RX3000 with our HOBOlink platform.


Data Delivery (HOBOlink and RX3000)

Configure HOBOlink to automatically deliver data from HOBO Remote Monitoring Systems to other web-based services, such as Weather Underground.


Alarms & Relays (HOBOlink and RX3000)

Multiple levels of alarms and actions can be set for each sensor.


Smart Sensor Intervals (HOBOlink and RX3000)

Technical Information

Operating range -40° to 60°C (-40° to 140°F); no remote communications for battery
voltage less than 3.9 V DC
Smart Sensor Connectors 10
Smart Sensor Network Cable 100 m (328 ft) maximum
Smart Sensor Data Channels Maximum of 15 (some smart sensors use more than one data channel;
see sensor manual for details)
Module Slots 2
Logging Rate 1 second (RX3001 and RX3002) or 1 minute (RX3003 and RX3004) to 18
hours
Time Accuracy ±8 seconds per month in 0° to 40°C (32°F to 104°F) range;
±30 seconds per month in -40° to 60°C (-40° to 140°F) range
Battery Type/Power Source 4 Volt, 10 AHr, rechargeable sealed lead-acid; external power required
using one of these options: AC power adapter (AC-U30), solar panel
(SOLAR-xW), or external power source 5 V DC to 17 V DC with external
DC power cable (CABLE-RX-PWR)
Rechargable Battery Service Life Typical 3–5 years when operated in the temperature range -20° to 40°C
(-4°F to 104°F); operation outside this range will reduce the battery
service life
Memory 32 MB, 2 million measurements, continuous logging
Alarm Notification Latency Logging interval plus 2–4 minutes, typical
Enclosure Access Hinged door secured by two latches with eyelets for use with usersupplied
padlocks
LCD LCD is visible from 0° to 50°C (32° to 122°F); the LCD may react slowly
or go blank in temperatures outside this range
Materials Outer enclosure: Polycarbonate/PBT blend with stainless steel hinge
pins and brass inserts; Inner enclosure: Polycarbonate; Gaskets:
Silicone rubber; Cable channel: EPDM rubber; Cable opening cover:
Aluminum with ABS plastic thumb screws; U-Bolts: Steel with zinc
dichromate finish
Size 18.6 x 18.1 x 11.8 cm (7.3 x 7.1 x 4.7 in.); see diagrams on next page
Weight 2.2 kg (4.85 lb)
Mounting 3.8 cm (1.5 inch) mast or wall mount
Environmental Rating Weatherproof enclosure, NEMA 4X (requires proper installation of
cable channel system)
CE The CE Marking identifies this product as complying with all relevant
directives in the European Union (EU)

Ethernet (RX3001

Connector One RJ45/100BaseT

Wi-Fi (RX3002)

Network Standards IEEE 802.11b/g/n
Frequency Range 2.412–2.484 GHz
Antenna Connector 1, no diversity supported
Data Rates 1, 2, 5.5, 11 Mbps (802.11b); 6, 9, 12, 18, 24, 36, 48, 54 Mbps (802.11g
802.11n, HT20 MCS0 (6.5 Mbps) to HT20 MC87 (65 Mbps)
Number of Selectable Radio Subchannels Up to 14 channels; profiles available will include USA, France, Japan,
Spain, Canada, and “Other” (multiple countries)
Radio Modulations OFDM, DSSS, DBPSK, DQPSK, CCK, 16QAM, 64QAM
Security WEP 64/128, WPA-PSK, AES end-to-end encryption, WPA2,
protocols not listed are not supported
Maximum Receive Level -10 dBm (with PER <8%)
Receiver Sensitivity -72 dBM for 54 Mbps, -87 dBm for 11 Mbps, -89 dBm for 5.5 Mbps,
-90 dBm for 2.0 Mbps, -92 dBm for 1.0 Mbps

Cellular (RX3003 and RX3004)

Wireless Radio RX3003:
GSM/GPRS/EDGE: Quad band 850/900/1800/1900 MHz,
UMTS/HSPA+: Five band 800/850/900/1900/2100 MHz
RX3004:
GSM/GPRS/EDGE: Quad band 850/900/1800/1900 MHz
UMTS/HSPA+: Seven band 800/850/900/1800/1900/2100 MHz
LTE: Twelve Band 700/800/850/900/1800/1900/2100/2600 MHz
Antenna RX3003: Penta band
RX3004: 4G LTE

Onset have a complete range of external smart sensors to suit the;

HOBO RX3000, RX2100 Range, U30, H21 and H22 Data Logger series.



View the range of smart sensors here >>

Get Smarter About Your Environment With The RX3000

The HOBO RX3000, Onset’s most flexible remote data logging station, provides instant access to site-specific environmental data anywhere, anytime via the internet. The station combines the versatility and sensor quality of more expensive systems, an onboard LCD display, and the convenience of plug-and-play operation. The RX3000 is a configurable system.

The RX3000 station is the basic component of the cost-effective and scalable HOBOnet Field Monitoring System for crop management, environmental research, and greenhouse operations.

You can customise your RX3000 to suit your specific needs, or you can select one of our Weather Station Kits.


Highlighted Features

  • Flexible support for a broad range of sensors
  • LCD display for easy field deployment
  • Cloud-based data access through HOBOlink
    • Get 24/7 web access to your data via web browser
    • Verify RX3000 system status remotely
    • Set up and manage alarm notifications over the web
    • Schedule automated delivery of data
  • Plug-and-play operation
  • Alarm notifications via text, email
  • Rugged double-weatherproof enclosure
  • Configurable from your mobile device
  • Optional Analog Input, Relay, and Water Level Sensor Modules
  • Remote water level and water flow monitoring with Onset’s Water Level Module.


Applications


Measurements

The RX3000 Data Logger supports the following measurements (sensors sold separately):

Temperature, Relative Humidity, 4-20mA, AC Current, AC Voltage, Air Velocity, Amp Hour (Ah), Amps (A), Barometric Pressure, Carbon Dioxide, Compressed Air Flow, DC Current, DC Voltage, Differential Pressure, Event, Gauge Pressure, Kilowatt Hours (kWh), Kilowatts (kW), Leaf Wetness, Light Intensity, Power Factor (PF), Pulse Input, Rainfall, Soil Moisture, Volatile Organic Compound, Volt-Amp Reactive (VAR), Volt-Amp Reactive Hour, Volt-Amps (VA), Volts (V), Water Flow, Water Level, Watt Hours (Wh), Watts (W), Wind


Important Note:

HOBOware software and USB cable are required for initial setup of WiFi units or Ethernet units with Static IP addresses.