-
OVERVIEW
Automate Room Occupancy & Light Detection in Minutes
The HOBO Occupancy & Light data logger monitors room occupancy and indoor light changes within a 12m range to identify occupancy patterns and determine energy usage and potential savings.
Features
- Measures room occupancy up to 12 meters away
- Auto-calibration of ON and OFF thresholds ensures reliable readings
- LCD screen displays signal strength, enabling proper logger placement
- Optional light pipe eliminates effects of ambient sunlight or other lighting sources
- Compatible with HOBOware and HOBOware Pro software for logger setup and graphing & analysis
Important Information
Requires HOBOware software and a USB cable. (Note: A USB cable is included w/HOBOware Pro CD or USB software purchase). See compatible items below.
Please note: The UX90-005 has been discontinued
-
SPECIFICATIONS
Occupancy Sensor
Detection range maximum 12 m (39.4 ft) Detection Performance 102° (±51°) Horizontal; 92° (±46°) Vertical (see Figure B in User Manual) Detection Zones 92 (see Figure B in User Manual) Light Sensor
Light Threshold > 65 lux Light Type LED, CFL, fluorescent, HID, incandescent, natural Logger
Memory Modes Wrap when full or stop when full Start Modes Immediate, push button, date & time, or next interval Stop Modes When memory full, push button, or date & time Time Accuracy ±1 minute per month at 25°C (77°F) (see Plot A in User Manual) Power Source One 3V CR2032 lithium battery and USB cable Battery Life 1 year typical use Memory UX90-005/-006: 128 KB (84,650 measurements, maximum) Download Type USB 2.0 interface Full Memory Download Time 10 seconds for 128 KB, 30 seconds for 512 KB Operating Range Logging: -20° to 70°C (-4° to 158°F); 0 to 95% RH (non-condensing)
Launch/Readout: 0° to 50°C (32° to 122°F) per USB specification
Occupancy Sensor Range: 20° to 60°C (-4° to 140°F); 15 to 85% RH
(non-condensing)LCD LCD is visible from: 0° to 50°C (32° to 122°F); the LCD may react slowly
or go blank in temperatures outside this rangeSize 3.66 x 8.48 x 2.87 cm (1.44 x 3.34 x 1.13 in.) Weight 30 g (1.06 oz) Environmental Rating IP50 CE The CE Marking identifies this product as complying with all relevant
directives in the European Union (EU). -
SOFTWARE
HOBOware Software
HOBOware software is used for launching, reading out, and plotting data from HOBO® data loggers. With HOBOware, you can also check logger status, filter and export data, save changes to graphs in project files, and scale data with the Linear Scaling and Pulse Scaling data assistants. There are two versions of HOBOware: HOBOware and HOBOware Pro.
Learn more about HOBOware and HOBOware-Pro Features >>
HOBO UX90 Occupancy/Light Logger – 12 Metre Sensors
$657.80 NZD ex GST
The HOBO Occupancy & Light data logger monitors room occupancy and indoor light changes to identify occupancy patterns and determine energy usage and potential savings.
