Search
Menu Close

HOBO 4-Channel Thermocouple Data Logger - UX120-014M

Manufacturer:
The HOBO UX120 Thermocouple Logger is a four-channel LCD data logger for measuring and recording temperature in a broad range of monitoring applications and can accept up to four J, K, T, E, R, S, B, or N type probes.
Part Number: UX120-014M
Back to Previous Page
Product Files
$479.00 ex GST
i h

The HOBO UX120 Thermocouple Logger is a four-channel LCD data logger for measuring and recording temperature in a broad range of monitoring applications. The logger makes it easy and convenient to record temperatures over a broad range (-260 to 1820⁰ C) and can accept up to four J, K, T, E, R, S, B, or N type probes.

In addition to accepting four thermocouple probes, the logger features an internal temperature sensor for logging ambient temperatures, further extending the range of application possibilities

  • Easy-to-view LCD display confirms logger operation and battery statusNear real-time readout of current temperatures as well as minimum, maximum, average and standard deviation statistics
  • On-screen alarms notify you if temperatures exceed high or low thresholds
  • Large memory capacity capable of storing 1.9 million measurements
  • Start, stop, and restart push buttons
  • User upgradeable firmware

Environment:
The UX120-014M Data Logger is for use in Indoor environments

Measurements:
The UX120-014M Data Logger supports the following measurements (sensors sold separately): Temperature

 
 Only need one thermocouple input? See UX100-014M
 
IMPORTANT: This HOBO data logger requires HOBOware software and a communications device. See compatible items below and the "software" tab above.

HOBO Thermocouple Data Logger UX120 014M

Learn more about the HOBO UX120 Thermocouple Logger, a four-channel LCD data logger for measuring and recording temperature in a broad range of monitoring applications. The logger makes it easy and convenient to record temperatures over a broad range (-260 to 1820⁰ C) and can accept up to four J, K, T, E, R, S, B, or N type probes.

The country of origin for this product is the United States. To see the full specifications for this product, please see our product manual found under the documentation tab if available

Thermocouple


Type Range Accuracy Resolution
J -210° to 760°C (-346° to 1,400°F) ±0.6°C (±1.08°F) ± thermocouple probe accuracy 0.03°C (0.06°F)
K -260° to 1,370°C (-436° to 2,498°F) ±0.7°C (±1.26°F) ± thermocouple probe accuracy 0.04°C (0.07°F)
T -260° to 400°C (-436° to 752°F) ±0.6°C (±1.08°F) ± thermocouple probe accuracy 0.02°C (0.03°F)
E -260° to 950°C (-436° to 1,742°F) ±0.6°C (±1.08°F) ± thermocouple probe accuracy 0.03°C at (0.05°F)
R -50° to 1,550°C (-58° to 2,822°F) ±2.2°C (±3.96°F) ± thermocouple probe accuracy 0.08°C (0.15°F)
S -50° to 1,720°C (-58° to 3,128°F) ±2.2°C (±3.96°F) ± thermocouple probe accuracy 0.08°C (0.15°F)
B 550° to 1,820°C (1,022° to 3,308°F) ±2.5°C (±4.5°F) ± thermocouple probe accuracy 0.1°C (0.18F)
N -260° to 1,300°C (-436° to 2,372°F) ±1.0°C (±1.8°F) ± thermocouple probe accuracy 0.06°C (0.11°F)

 

 

Internal 10K Thermistor (Temperature):


Plot A Time AccuracyRange (Logging): -20° to 70°C (-4° to 158°F)
Acuracy: ±0.21°C from 0° to 50°C (±0.38°F from 32° to 122°F), see Plot A
Resolution: 0.024°C at 25°C (0.04°F at 77°F); see Plot A
Drift: <0.1°C (0.18°F) per year

 

 

Logger


Logger Operating Range
Logging: -20° to 70°C (-4° to 158°F); 0 to 95% RH (non-condensing); logger accuracy from 0° to 50°C (32° to 122°F)
Launch/readout: 0° to 50°C (32° to 122°F) per USB specification

Logging rate: 1 second to 18 hours, 12 minutes, 15 seconds
Logging modes: Normal, Burst or Statistics
Memory modes: Wrap when Full or Stop when Full
Start modes: Immediately, Push Button, Date & Time or Next Interval
Stop modes: When Memory Full, Push Button, or Date & Time
Restart mode: Push Button
Time Accuracy - UX120-014MTime accuracy: ±1 minute per month at 25°C (77°F), see Plot B
Battery life: 1 year, typical with logging rate of 1 minute and sampling interval of 15 seconds or greater
Battery type: Two AAA 1.5V alkaline batteries, user replaceable
Memory: 4 MB (1.6 million measurements, maximum)
Download type: USB 2.0 interface
Full memory download time: Approximately 1.5 minutes
LCD: LCD is visible from: 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range
Size: 10.8 x 5.41 x 2.54 cm (4.25 x 2.13 x 1 in.)
Weight107.5 g (3.79 oz)
Environmental rating: IP50

Description: ce - The CE Marking identifies this product as complying with all relevant directives in the European Union (EU)

HOBOware Software

IMPORTANT: This HOBO data logger requires HOBOware software and a communications cable (see related products below)
HOBOware Software is a FREE download


or Learn more about HOBOware and HOBOware-Pro features

 

Note: This logger also operates with the advanced HOBOware-Pro Software

 


 

The HOBO UX120 Thermocouple Logger is a four-channel LCD data logger for measuring and recording temperature in a broad range of monitoring applications. The logger makes it easy and convenient to record temperatures over a broad range (-260 to 1820⁰ C) and can accept up to four J, K, T, E, R, S, B, or N type probes.

In addition to accepting four thermocouple probes, the logger features an internal temperature sensor for logging ambient temperatures, further extending the range of application possibilities

  • Easy-to-view LCD display confirms logger operation and battery statusNear real-time readout of current temperatures as well as minimum, maximum, average and standard deviation statistics
  • On-screen alarms notify you if temperatures exceed high or low thresholds
  • Large memory capacity capable of storing 1.9 million measurements
  • Start, stop, and restart push buttons
  • User upgradeable firmware

Environment:
The UX120-014M Data Logger is for use in Indoor environments

Measurements:
The UX120-014M Data Logger supports the following measurements (sensors sold separately): Temperature

 
 Only need one thermocouple input? See UX100-014M
 
IMPORTANT: This HOBO data logger requires HOBOware software and a communications device. See compatible items below and the "software" tab above.